Clip-On Wireless Microphone - 1-to-2, Noise Cancelling Live

Small batch purchases are supported, and there is no threshold for retail distribution. Wholesalers, traders, retailers, Pinduoduo, Taobao, Tmall, Amazon, eBay, AliExpress, etc. are also welcome to negotiate business. The company can customize LOGO according to customer requirements, and can also customize finished products according to the products provided by customers. There is no mold opening fee for certain quantities, which is helpful for brand development. We can provide neutral packaging and accept OEM/ODM orders from our customers.

2.4G private transmission protocol, private high-quality compression algorithm
● Adaptive frequency hopping, strong anti-interference/stable signal/long distance
● Automatic pairing, plug and play
● Extremely low delay, delay <20ms, audio and video synchronization
● Overall power consumption: transmitter <10mA, receiver <25mA
● Supports slow charging or fast charging of mobile phones (charging while recording)
● Built-in 360-degree omnidirectional high-definition high-sensitivity microphone, and also supports ECM, MEMS, and analog microphones
● Good compatibility, supports mobile phones/computers/tablets at the same time
● Support USB firmware backup and upgrade
●The generator has a built-in 60mAh rechargeable button battery, which can last for 6-8 hours.
● Frequency response: 20HZ-20KHZ
● Sensitivity: -30dB
● Signal-to-noise ratio: -65dB
● Transmission distance: 20 meters

Power on: Short press the power button, the white light will stay on for 1 second and then turn to flashing white light.

Pairing: After short pressing to power on, press and hold the power button for about 8 seconds, the white light will flash quickly (note: long pressing for 3 seconds will appear
The white light flashes, keep pressing and holding until the white light flashes again), then plug the receiver into your mobile phone or other device,
At this time, the green light of the receiver flashes. Once connected to the transmitter, the green light turns solid and the transmitter turns off.

Mute: After connecting, short press the power button of the transmitter to switch to mute state. The white light will stay on. At this time, the other party cannot hear the transmission.
The sound on the device, and then press it briefly to unmute the sound, and the white light will go out.

Shut down: long press the power button for 3 seconds, the white light will flash 2 times.
Note: As long as the transmitter and receiver have been paired, they will automatically connect as soon as they are turned on next time.
2) Indicator light description:
Transmitter:
Power on: white light stays on for 1 second
Shut down: white light flashes 2 times quickly
Pairing: White light flashes quickly
Connection successful: white light goes out
Silent state: white light always on
Low battery status: white light flashes slowly
Receiver:
Pairing: green light flashes. Connection successful: green light stays on

All microphone series are in stock, inquiries are welcome